exe's tech n stuff » HowTo http://blog.the-exe.org woop woop Thu, 15 Sep 2011 13:49:45 +0000 en hourly 1 http://wordpress.org/?v=3.3.1 JS/Psyme.AKH – False Positive http://blog.the-exe.org/jspsyme-akh-false-positive/ http://blog.the-exe.org/jspsyme-akh-false-positive/#comments Tue, 12 Apr 2011 12:03:58 +0000 eXe http://blog.the-exe.org/?p=1024 Continue reading →]]> {lang: 'de'}

This morning our Norman clients reported an trojan horse to be found on every Computer in the Network.

After starting a scan for any other infected files on the client computers, norman released the following support issue.

Norman Support Issue

After updating our Norman Servers the Update was spread automatically through the network. The Warnings disappeared and everything was back to normal.

Update the Norman Server and give it some time. Just ignore the message.

]]> http://blog.the-exe.org/jspsyme-akh-false-positive/feed/ 0 Outlook Error “Dieser Vorgang wurde wegen Beschränkungen auf diesem Computer abgebrochen” http://blog.the-exe.org/outlook-error-dieser-vorgang-wurde-wegen-beschrankungen-auf-diesem-computer-abgebrochen/ http://blog.the-exe.org/outlook-error-dieser-vorgang-wurde-wegen-beschrankungen-auf-diesem-computer-abgebrochen/#comments Mon, 11 Apr 2011 11:58:30 +0000 eXe http://blog.the-exe.org/?p=1021 Continue reading →]]> {lang: 'de'}

Wenn auf einem Rechner mit Outlook mehrere Browser installiert sind und einer der Browser anschliessend deinstalliert wird, kann es sein das Outlook weder Links auf Websites noch Mailto Links öffnen kann. Die Ursache liegt in der Deinstallation des Browsers. Dabei werden diverse Registry werte nicht mehr auf die default Werte zurückgesetzt. Diverse Lösungen im Netz empfehlen den Standardbrowser neu zu definieren. Leider funktioniert dies nicht immer.

In folgendem Beitrag habe ich die Anleitung gefunden welche das Problem bei mir behoben hat.

http://www.drwindows.de/programme-und-tools/18451-geloest-vorgang-wurde-wegen-beschraenkungen-diesem-computer-3.html#post174046

a) Dazu druecke auf der Tastatur die Windows-Taste und die Taste[R] (alternativ auf Start und anschließend auf Aufuehren klicken).
b) Bitte gib nun “regedit” in die Befehlszeile, bestaetige mit OK (ohne Anfuehrungszeichen)
c) Wir befinden uns nun im Registrierungseditor.
d) Bitte öffne nun den ersten Schluessel (HKEY_CLASSES_ROOT)
e) Navigiere bitte nun zum Schluessel .htm! Hier sollte ein Verweis auf einen anderen Registrierungsschluessel erstellt worden sein, dieser wurde durch “Google-Chrome” ersetzt.
f) Navigiere zurueck zum Schluessel .htm, auf der rechten Seite klicke bitte auf Standard. Trage hier nun den Wert “htmlfile” ein. (ohne Anfuehrungszeichen)
g) Diese Vorgangsweise benoetigen wir fuer folgende, weitere Schluessel:
.htm – Standard-Wert in “htmlfile” aendern
.html – Standard-Wert in “htmlfile” aendern
.mdbhtml – Standard-Wert in “Accesshtmlfile” aendern
.mht – Standard-Wert in “mhtmlfile” aendern
.mhtml – Standard-Wert in “mhtmlfile” aendern
.shtm – Standard-Wert in “htmlfile” aendern
.shtml – Standard-Wert in “htmlfile” aendern
.stm – Standard-Wert in “htmlfile” aendern
(Ohne Anfuehrungszeichen)

Danke an alterkater für das erfassen dieser Lösung.

]]> http://blog.the-exe.org/outlook-error-dieser-vorgang-wurde-wegen-beschrankungen-auf-diesem-computer-abgebrochen/feed/ 0 Error 0xc000000F when installing application on Windows 7 http://blog.the-exe.org/error-0xc000000f-when-installing-application-on-windows-7/ http://blog.the-exe.org/error-0xc000000f-when-installing-application-on-windows-7/#comments Fri, 04 Feb 2011 07:38:02 +0000 eXe http://blog.the-exe.org/?p=958 Continue reading →]]> {lang: 'de'}

If you try to install an application you might receive an error 0xc000000F saying Windows cannot launch the application.

This happens if your Application is installed from a network Share. To solve the Problem you should copy the application to your local disc and start the installation procedure from this place. There is a HotFix by Microsoft as well. I did not test this personally but it might work as well.

The patch can be loaded here.
The corresponding KB article can be found here.

]]> http://blog.the-exe.org/error-0xc000000f-when-installing-application-on-windows-7/feed/ 0 Windows Server not updating internet time http://blog.the-exe.org/windows-server-not-updating-internet-time/ http://blog.the-exe.org/windows-server-not-updating-internet-time/#comments Thu, 27 Jan 2011 09:08:23 +0000 eXe http://blog.the-exe.org/?p=956 Continue reading →]]> {lang: 'de'}

There might be a problem if you have a domain controller that is NTP server for the domain. The server might not update the time from external NTP server, even if you added an existing NTP server from the internet. There is a simple reason for that. By default windows is configured to update time from internet but there is a registry key that is not set correctly to effectively update the time from this server.

First go to:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters
in the key NtpServer you can set your preferred NTP server in the internet. For example pool.ntp.org

Then go to:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters
find the key called Type and change it’s value to NTP

After adjusting these keys open cmd and run the following command:
net stop w32time && net start w32time

The system time should change within the next few minutes.

All that is described in a Microsoft KB article: KB816042

]]> http://blog.the-exe.org/windows-server-not-updating-internet-time/feed/ 0 Sage 50 Version 2009 LiveUpdate not installing Updates http://blog.the-exe.org/sage-50-version-200-liveupdate-not-installing-updates/ http://blog.the-exe.org/sage-50-version-200-liveupdate-not-installing-updates/#comments Thu, 20 Jan 2011 09:26:39 +0000 eXe http://blog.the-exe.org/?p=952 Continue reading →]]> {lang: 'de'}

There might be a problem with LiveUpdate of Sage50. You receive a list with updates available and live update is loading the updates and installing them as well. When finished and you run live update again the same updates will show up again.
The reason for that is an update failing without giving you information. In that case there is a simple solution. You’ll have to install the updates directly without LiveUpdate.
Go to the Sage FTP server to download a collection of all updates for your product.
ftp://ftp.sagesesam.ch/KnowledgeDB/Deutsch/Sage50/Version_2009/Liveupdate/
If you need another language than German just navigate to the corresponding path on the FTP. There is a ZIP file to the latest version (for German it would be LUPSage50_CHD_9190.zip) Download the package and run the batch file included. Then all the patches are being installed one after another.
After installing you can run LiveUpdate again to check if all the updates were installed.

]]> http://blog.the-exe.org/sage-50-version-200-liveupdate-not-installing-updates/feed/ 0 Backup Exec 2010 Error E000FED1 – A failure occurred querying the Writer status http://blog.the-exe.org/backup-exec-2010-error-e000fed1-a-failure-occurred-querying-the-writer-status/ http://blog.the-exe.org/backup-exec-2010-error-e000fed1-a-failure-occurred-querying-the-writer-status/#comments Thu, 06 Jan 2011 09:10:34 +0000 eXe http://blog.the-exe.org/?p=949 Continue reading →]]> {lang: 'de'}

Backup Exec fails with a writer status error. The backup exec error code is E000FED1. It appears in the eventlog of the server with the ID 34113.

This can happen if one of the writers fails while performing backup of the shadow copies.

There is a KB article from Symantec for this specific error. It can be found here.

You could check the points mentioned in the post or just reboot your server to solve the issue.

Update: The solution provided above does only work on a 2003 server based system. Thanks to John for the hint.

]]> http://blog.the-exe.org/backup-exec-2010-error-e000fed1-a-failure-occurred-querying-the-writer-status/feed/ 2 Sony Ericsson Xperia X10 sync with Microsoft Outlook http://blog.the-exe.org/sony-ericsson-xperia-x10-sync-with-microsoft-outlook/ http://blog.the-exe.org/sony-ericsson-xperia-x10-sync-with-microsoft-outlook/#comments Thu, 30 Dec 2010 14:02:49 +0000 eXe http://blog.the-exe.org/?p=931 Continue reading →]]> {lang: 'de'}

Just in case someone wants to sync his Xperia X10 with Outlook and is wondering why it’s not working, here is the solution.

Sony Ericsson (SE) does not support sync with outlook by default. They deliver various tools. But by default you’re just able to sync your Outlook Contacts to Google and then back to your Mobile. Or If you have Push mail, you can use the preinstalled Moxier Client.

If you just want to sync your local Outlook you have to use third party software such as My Phone Explorer. You can download that application on the following Site.

http://www.fjsoft.at/en/downloads.php

You will have to enable USB debugging on your phone before it will work. You have to enable usb debugging. This can be found under
Settings > Applications > Development > USB debugging

Then you can configure the software on your computer and initialize the synchronization.

Just in Case your Mobile is not recognized by your computer, you may want to install PC Companion from SE Website. This might help.

Hope this article may halt some of you guys.
Thanks to the developer of the My Phone Explorer for this great application. The solution provided by SE is a total pain in the ass!

]]> http://blog.the-exe.org/sony-ericsson-xperia-x10-sync-with-microsoft-outlook/feed/ 0 550 5.3.4 ROUTING.SizeLimit http://blog.the-exe.org/550-5-3-4-routing-sizelimit/ http://blog.the-exe.org/550-5-3-4-routing-sizelimit/#comments Mon, 06 Sep 2010 12:16:31 +0000 eXe http://blog.the-exe.org/?p=900 Continue reading →]]> {lang: 'de'}

Diagnoseinformationen für Administratoren:
Generierender Server: domain.com
user@domain.com
#550 5.3.4 ROUTING.SizeLimit; message size exceeds fixed maximum size for route ##
Ursprüngliche Nachrichtenkopfzeilen:

If someone tells you about receiving the error above after sending you am message with some bigger attachment, you can check the receive connector on the Hub Transport and the Edge, or on the Mailbox and on the Hub server as well.

If you can’t find anythin at all, you might try the following cmdlet on the Hub Transport Server
Get-SendConnector ¦ Select identity,MaxMessageSize
You might see another message Size on the Edge Sync Subscription than on the rest of the Server.

If so go to your Hub Transport Server and open Exchange Management Console -> Organization Configuration -> Hub Transport -> Send Connectors

On each EdgeSync Connector you can change the Value for Maximum message size (KB): in the general tab to 51200 to allow message size of 50MB

If you run the cmdlet again you will see the new value of 50MB in the List.

To make sure these changes take effect immediately you’ll have to run the following cmdlet on your Hub Transport Server to update the setting on your Edge Server.
Start-EdgeSynchronization

From now on messages of maximum 50MB should be delivered from Edge to Hub Transport Server and the message will no longer appear.

]]> http://blog.the-exe.org/550-5-3-4-routing-sizelimit/feed/ 0 Get/install available Updates in Linux http://blog.the-exe.org/get-instal-available-updates-in-linux/ http://blog.the-exe.org/get-instal-available-updates-in-linux/#comments Tue, 31 Aug 2010 13:37:52 +0000 eXe http://blog.the-exe.org/?p=896 {lang: 'de'}

To get a list of all available updates in Linux you should run the following command.

apt-get update

To install the updates

apt-get upgrade

]]> http://blog.the-exe.org/get-instal-available-updates-in-linux/feed/ 1 Install VMwareTools on Linux running on ESXi 4.0 http://blog.the-exe.org/install-vmwaretools-on-linux-running-on-esx-4-0/ http://blog.the-exe.org/install-vmwaretools-on-linux-running-on-esx-4-0/#comments Tue, 31 Aug 2010 13:25:22 +0000 eXe http://blog.the-exe.org/?p=892 Continue reading →]]> {lang: 'de'}

If you install Linux in a virtual Machine on ESXi 4.0 you should install the VMwareTools. This is not a task that you can do as easy as on windows. You’ll have to copy the install files to your machine and install them manually.

There is a List of tasks you’ll have to do to install the VMwareTools.

First you’ll have to prepare your installation of Linux for the installation by executing this command.
aptitude install autoconf automake binutils cpp gcc linux-headers-$(uname -r) make psmisc
After this is finished you should push the installation in the console.

this will copy the installation files so you can mount them in the next step to your virtual cd drive. This is done by using the following command.
mount /dev/cdrom /mnt
then you’ll have to copy the files from the cd to your virtual disk. And by extracting them.
cp /mnt/VMwareTools-4.0.0-208167.tar.gz /root
cd /root
tar xvf VMwareTools-4.0.0-208167.tar.gz
To start the installation do the following
cd vmware-tools-distrib/
./vmware-install.pl
Then follow the instructions on the screen to install the Tools.

]]> http://blog.the-exe.org/install-vmwaretools-on-linux-running-on-esx-4-0/feed/ 0